Product Discovery: Compare Sculpting Medium and Snowfall

Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.

Use MC-001 6mm Low Track Masking Tape to tape the canvas off into 4 equal squares.

Using the Soft Fan with SC-9 Jaded, SC-30 Blue Dawn, SC-88 Tu Tu Tango or SC-97 Cant-elope, apply 3 coats to each of the squares. Allow glaze to dry between coats.

Remove the tape before the glaze is dry.

Using the 1.5” circle stamp, punch 6 holes in the paper. Cut them out from the paper leaving at least ¼” around each circle.

Place 1 circle in the center of the square glaze with SC-88 Tu Tu Tango and 2 circles in the square glazed with SC-9 Jaded. Using the Script Liner with SG-501 Sculpting Medium, apply 1 thick coat to the circles. Carefully lift up the paper.

Place 1 circle in the center of the square glazed with SC-30 Blue Dawn and 2 circles in the square glazed with SC-97 Cant-elope. Using the Script Liner with SG-302 Snowfall, apply 1 thick coat to the circles. Carefully lift up the paper.

Allow all circles to completely dry.

Using the Script Liner with SC-88 Tu Tu Tango, apply 1 coat to a circle in each of the squares with 2 circles. Using the Script Liner with SC-97 Cant-elope, apply 1 coat to the other circle in the squares with 2 circles.

Using the Script Liner with S-2101 Clear Brushing Glaze, apply 2 coats to the lines where the tape was located. Allow glaze to dry between coats.

Fire to cone 06.