Begin with soft fired stoneware bisque; moisten a clean sponge and wipe bisque to remove any dust.
Use the SG-401 Designer Liner to create the design directly to the bisque surface. Focus on moving away from the line to avoid clogging the tip.
Once the Designer Liner is completely dry, apply 2 coats of SW-250 White Opal to the top ¼ and the entire inside of the piece.
Use a soft fan to apply 3 coats of SW-198 Rose Quartz to the outside of the mug; receede the coats significantly or this combination can create excessive movement. Bring one coat down to the foot, finish the next coat up about an inch, and the third coat up an additional 2 inches.
Use a clean sponge to wipe the excess glaze off of the foot.
