“Hello Summer” Tray

1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.  
2. Using a CB604 #4 Soft Fan, apply 2 coats of FN001 White to the top side of the plate.  Allow to dry! 
3. Using AC230 Clay Carbon Paper and a pencil, trace the pattern onto the piece except the lettering.  
4. Using a CB106#6 Script Liner, apply 3 coats of SC076 Cari-bein Blue to the top section of the popsicle.   
5. Using a CB106#6 Script Liner, apply 3 coats of SC016 Cotton Tail to the center part of the popsicle. 
6. Using a CB106#6 Script Liner, apply 3 coats of SC074 Hot Tamale to the bottom section of the popsicle. 
7. Using a CB404 #4 Pointed Round, apply 3 coats of SC046 Rawhide to the popsicle stick, while the last coat is still damp, streak in some SC016 Cotton Tail for some highlights. Allow to dry! 
8. Using AC230 Clay Carbon Paper and a pencil, trace the lettering pattern onto the piece. 
9. Squirt some SG401 Black Designer Liner onto a palette.  Using a CB110 #10/0 Liner and a CB202 #2 Detail Liner, add some water to the brush and blend with some SG401 Black to slightly thin then paint in the lettering with SG401 Black.  Allow to dry! 
10. Using the FD254 Black Licorice and FD258 Pure White French Dimensions, add some highlights to the outer edge of the popsicle and the popsicle stick.  Allow to dry! 
11. Using a DB805 #3 Fan, streak some SG404 Blue to the outer edge of the top of the plate.  Allow to dry! 
12. Using a CB604 #4 Soft Fan, apply 3-4 coats of FN006 to the back of the plate.  Allow to dry! 
13. Using a CB604 #4 Soft Fan, apply 1 coat of S2101 Crystal Clear Brushing to the top of the plate.  Allow to dry! 
14. Stilt and fire to shelf cone 06/05. 

Additional Adaptations & Tips if needed. 

• Make sure to glaze is dry before trying to trace on the pattern, if there is any moisture the AC230 Clay Carbon will not work. 
• All Designer Liners and French Dimensions should be shook/ stirred well in case there is a water head on top of the colors.