- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Using a CB604 #4 Soft Fan, apply 2 coats of FN001 White to the top of the plate. Allow to dry!
- Using AC230 Clay Carbon Paper and a pencil, trace the pattern onto the piece.
- Using a CB404 #4 Pointed Round and a CB202 #2 Detail Liner, apply 3 coats of SC074 Hot Tamale to the following letters: H, p, y, t, o, J, l and some of the stars.
- Using a CB404 #4 Pointed Round and a CB202 #2 Detail Liner, apply 3 coats of SC076 Cara-bein Blue to the following letters: a, p, 4, h, f, u, y and some of the stars. Allow to dry!
- Apply SG410 Bright Blue Designer Liner to the right side of the letters. (Refer to the photo).
- Apply SG404 Blue and SG405 Red Designer Liner to the star bursts also add some small dots between the star bursts. Allow to dry.
- Using FD258 Pure White French Dimensions, add highlights on each of the letters and the 4.
- Optional: The edge of the plate can be banded or not using a banding wheel and SG403 Red Designer Liner. Allow to dry!
- Using a CB604 #4 Soft Fan, apply 3-4 coats of FN004 Red to the back of the plate. Allow to dry!
- Using a CB604 #4 Soft Fan, apply 1 coat of S2101 Crystal Clear Brusing glaze to the top of the plate. Allow to Dry!
- Stilt and fire to shelf cone 06/05.
Additional Adaptations & Tips.
- Make sure to glaze is dry before trying to trace on the pattern, if there is any moisture the AC230 Clay Carbon will not work.
- Make sure to shake the Designer Liners and the French Dimensions well in case there is a water head on top of the colors.
