Hanukkah Plate

Instructions

Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
Using the pattern and clay carbon paper, trace the pattern onto the center of the plate using a pencil.
Using the CB-604 Soft Fan Brush, apply three coats of SW-152 Blue Splatterware onto the back of the plate, making sure not to glaze the foot or the bottom. When dry, flip plate over and apply three coats to the front rim of the plate.
Using the SG-404 Designer Liner Blue, outline all of the letters and the stars.
Fill the PAS1OZ Xiem Applicator Bottle Red with SW-501 White Gloss and attach the thickest tip (white). Use it to fill in the stars, OY and WORLD. Rinse the bottle and tip.
Fill the PAS1OZ Xiem Applicator Bottle Red with SW159 Blue Matte and use it to fill in TO and THE. Rinse out the applicator bottle and tip.
Using the CB-106, apply three coats of SW-123 Sapphire to the rest of the center of the plate around the letters. Use a smaller brush to get into tight spaces if needed.
Wipe off any excess glaze from the foot of the bowl with a damp sponge.
Do not stilt or hang over the edge of the kiln shelf.
Fire to cone 5/6.

Form

Colors

Decorating Accessories

Miscellaneous Accessories