Fundamentals Dragonfly Tile

Instructions

Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
Using a CB-604 #4 Soft Fan, apply 3 coats of UG-67 Ivory to the top of the tile. Allow to dry!
Center the tile on a banding wheel. Using a Cb-604 #4 Soft Fan, load the brush with water and then side load into the UG-31 Chocolate, spin the banding wheel and apply the UG-31 Chocolate creating a light circle of color. Allow to dry!
Using a pencil, trace the pattern on the tile using AC-230 Clay Carbon Paper under the pattern.
Using a pencil, trace the pattern on the tile using AC-230 Clay Carbon Paper under the pattern.
Using a CB-604 #4 Soft Fan and a CB-110 #10/0 Liner, apply the colors to the dragonfly as follows:
1. Body of the dragonfly 2 coats of UG-225 Plum.
2. Top wings – outer edge apply 3 coats of UG- 204 Orange, next larger section apply 3 coats of UG-223 Apricot and the smallest section with 3 coats of UG-58 Harvest Gold.
3. Lower wings – inner section, apply 3 coats of UG-209 Jade and the outer section with 3 coats of UG-91 True Teal.
Using the pencil tip, Add dots of UG-67 Ivory to the top and bottom sections of the wings or anywhere else you may like.
Using a CB-110 #10/0 Liner, detail the Dragonfly with UG-50 Jet Black. Allow it to dry.
Bisque fire to cone 04.
Using a CB-604 #4 Soft Fan, apply 2 coats of S-2101 Crystal Clear the top and sides of the tile. Allow to dry!
Stilt and fire to shelf cone 06.

Form

Colors

Decorating Accessories

Miscellaneous Accessories