Football App Plate

Instructions

Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
Cut out the football pattern. Place in the center of the plate and trace around the edge. Remove the pattern.
Using MC-001 6mm Low Tack Masking Tape, make horizontal lines going across the front of the plate.
Using the Soft Fan with SC-27 Sour Apple, apply 2 coats to the front of the plate. Do not glaze inside of the football. Allow glaze to dry between coats.
Squeeze out around 1 TBS of SC-8 Just Froggy onto the palette. Dip the sponge in the glaze and sponge the front of the plate. Do not sponge inside of the football.
Remove the tape before the glaze is bone dry.
Use the tape to make laces in the center of the football.
Using the Script Liner with SC-87 Ruby Slippers, apply 2 coats to the football. Allow glaze to dry between coats.
Remove the tape before the glaze is bone dry.
Using the Script Liner with SC-35 Gray Hare, apply 2 coats to the laces. Allow glaze to dry between coats.
Using the Soft Fan with SC-15 Tuxedo, apply 2 coats to the back of the plate. Allow glaze to dry between coats.
Using the Soft Fan with SG-703 Speckta-Clear Autumn, apply 1 coat to the entire plate.
Stilt and fire to cone 06.

Form

Colors

Decorating Accessories

Miscellaneous Accessories