Farmhouse Plate

Instructions

Begin with properly fired stoneware bisque. Moisten a clean sponge and wipe bisque to remove any dust.
Using a water-based marker laid flat against the table, draw a line around the bottom of the piece. This is the “no paint line.”
Use the Soft Fan to apply one coat of SC-34 Down To Earth on the rimmed edge of the plate.
With a damp sponge to wipe the top layer of SC-34 off the plate while leaving glaze in the ridges.Use the sea
sponge to dab SC-46 Rawhide, SC-86 Old Lace and SC-92 Café Ole randomly around the rim on the back of the plate. NOTE: Do not paint the bottom of the plate or below the no paint line.
Use the sponge-on-a-stick to apply SC-34 Down To Earth to the surface of MT-013 Honeycomb Mat then press mat onto the back rim.
Wipe off any glaze that may have been stamped below the no paint line.
Use the sea sponge to dab SC-46 Rawhide, SC-86 Old Lace and SC-92 Café Ole randomly around the rim on the front of the plate.
Using a palette knife, thicken SG-401 Black Designer Liner with AC-310 Silkscreen Medium to the consistency of peanut butter. With the shiny side down, rub the thickened Designer Liner over the words image from DSS-0153 Farmhouse Silkscreen.
Use the Soft Fan to apply one light coat of SW-002 Matte Stoneware Clear over the entire piece. Let dry.
Fire to cone 6. Do not stilt.

Form

Color

Decorating Accessories

Miscellaneous Accessories