Dinosaur Tape Tile

Instructions

Begin with properly fired cone 04 bisque.
Moisten a sponge and wipe bisque to remove any dust.
Using the Soft Fan with SC-77, apply 2 coats to the front of the tile. Allow glaze to dry between coats.
After the glaze is dry, place AC-230 Clay Carbon Paper over the tile.
Place the pattern on top and trace with the pencil.
Take MC-001 6mm Low Tack Masking Tape and tape over the pattern lines on the tile.
Using the Script Liner with SP-209, apply 2 coats to each section of the dinosaur. Allow glaze to dry between coats.
Using the Soft Fan with SC-10, apply 3 coats to the background. Allow glaze to dry between coats.
Remove the tape before the glaze is completely dry.
Using the Script Liner with SC-15 Tuxedo, apply 1 coat to the edge of the tile.
Stilt and fire to cone 06.

Form

Colors

Decorating Accessories

Miscellaneous Accessories