Blue and Green Wave Plate

Instructions

To create the paint chips, place the stroke and coat colors onto a piece of foil and bake in the oven for about 30 to 45 minutes at 250 degrees. Remove from the foil and crush individual colors into small pieces.
Divide the plate into 2 sections.
Using the Soft Fan, apply 2 coats of Clear to the back, keeping off the foot and inside areas.
Using the Fan, apply 2 coats of Ivy to 1 side of the divided plate, and Nimbus to the opposite side.
Using the Liner, apply in sections Ivy, and while wet, sprinkle on the green colored Stroke and Coat chips. Continue until the entire green section is completed.
Using the Liner, apply in sections Nimbus, and while still wet, sprinkle on the blue colored Stroke and Coat chips. Continue until the entire blue section is completed.
If you are concerned that the chips will move/get loose, spray a few light coats of hair spray to hold them in place.
Place on a well kiln washed shelf and fire to shelf cone 6

Form

Colors

Decorating Accessories

Miscellaneous Accessories