Apply 2 coats of SW-131 Birch to the outside of the Tumbler. Leave about 1/4″ from the top.
Apply wax resist in design of your choice over the Birch. In the featured photos, on was applied in vertical stripes and the other was applied in a lattice design.
Apply 2 coats of SW-178 Fool’s Gold to the entire Tumbler, avoiding the bottom. If the wax design that you applied is very detailed we would recommend only applying 1 coats where the combo is.
Use a clean sponge to wipe away any glaze that may have gotten on the bottom of the tumbler.
Let dry completely.
Fire to shelf cone 5/6.
Supplies
Form
SB-128 Tumbler Stoneware Bisque or CD128 Tumbler Mold
