Crackle Fish Tile

Instructions

Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
Using the Soft Fan with UG-51 China White, apply 3 coats to the front of the tile. Allow glaze to dry between coats. Allow glaze to dry completely.
Place AC-230 Clay Carbon Paper onto the front of the tile. 4. Place the pattern on top and trace with the pencil.
Using the Script Liner with UG-1 Kings Blue (large fish), UG-2 Sea Blue (medium fish), and UG-72 Wedgewood Blue (small fish), apply 3 coats to each fish. Allow glaze to dry between coats.
Before the fish are dry, use the wooden skewer to scratch a design into each fish.
After the glaze is dry, use a dry brush to brush away any glaze crumbs.
Using the Soft Fan with CC-101 Transparent, apply 3 even coats to the front of the tile. Allow glaze to dry between coats.
Using the Script Liner with SC-15 Tuxedo, apply 1 coat around the edge of the tile.
Stilt and fire to cone 06.
After the tile is cool, apply SS-335 Rich Blue over the front with a sponge. You should see it filling in the cracks. If you don’t have many cracks, wait one day, and try again. Wipe off excess paint with a paper towel.

Form

Colors

Decorating Accessories

Miscellaneous Accessories