Neutral & Natural Wicker Trees

Small Wicker Tree

1. Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
2. Apply 2 heavy coats of EL-110 Mudslide with the #4 Soft Fan Brush to the base of the tree.
3. Apply 2 coats of FN-32 Canton Jade with the #4 Soft Fan Brush on the tree
4. Once the FN-32 Canton Jade is dried, apply 2 coats of EL-106 Tidal Pool with the #4 Soft Fan Brush on the tree.
5. Fire to cone 06.

Medium Wicker Tree

1. Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
2. Apply 2 heavy coats of EL-110 Mudslide with the #4 Soft Fan Brush to the base of the tree.
3. Apply 2 coats of EL-106 Tidal Pool to the tree.
4. Once the EL-106 Tidal Pool is dried, apply 2 coats of EL-113 Spanish Moss from the bottom of the tree to the top of the tree underneath the 3 braided wicker lines, so the top section of the tree is just EL-106 Tidal Pool.
5. Fire to cone 06.

Large Wicker Tree

1. Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
2. With the #4 Soft Fan Brush apply 1 heavy coat of IN1037 Leaf Green.
3. With a damp sponge, wipe the IN1037 from the raised textures of the tree. Be sure to not wipe too much from the inset crevices
4. Mix equal parts FN-216 Sea Glass and IN1037 Leaf Green and apply 2 heavy coats on the tree
5. Fire to cone 06