Tear Drop Plate

Instructions

Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
Using the Soft Fan with FN-009 Black, apply 2 coats to the front of the plate. Allow glaze to dry between coats.
After the glaze is dry, place AC-230 Clay Carbon Paper over the front of the plate. Place the pattern on top and trace with the pencil.
Using the Detail Liner with AC-302 Wax Resist, trace over the pattern on the front of the plate. Make a line going around the rim of the plate.
Using the Script Liner with EL-128 Wheat, apply 2 coats to the top portion of each “drop”. Allow glaze to dry between coats. Apply a 3rd coat just to the center portion (area ¼” from the edge line).
Using the Script Liner with EL-129 Slate, apply 2 coats to the middle portion of each “drop”. Allow glaze to dry between coats. Apply a 3rd coat just to the center portion (area ¼” from the edge line).
Using the Script Liner with SC-11 Blue Yonder, apply a drop coat to the bottom portion of each “drop”
Using the Soft Fan with FN-009 Black, apply 2-3 coats to the back of the plate. Allow glaze to dry between coats.
Fire to cone 06.

Form

Colors

Decorating Accessories

Miscellaneous Accessories