Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to
remove any dust.
Using the CB-604 Soft Fan Brush, apply 3 coats ofSW-505 Purple Gloss to the back side and entire front of the plate. Do not glaze the bottom or the foot. Let dry well.
Using the carbon paper and a pencil, transfer the pattern onto the platter.
Using the CB-106 Script Liner, apply 2 coats of SW-508 Black Gloss to the house and the hill. Use the CB-404 #4 Pointed Round to get into any tight spaces.
Using the CB-404 #4 Pointed Round, apply 2 coats of SW-501 White Gloss to the windows of the house
Using the CB-404 #4 Pointed Round, apply 2 coats of SW-502 Yellow Gloss to the moon.
Using the CB-404 #4 Pointed Round, mix a small amount of SW-508 Black Gloss and SW-501White Gloss together on a plate to make gray. Apply 2 coats to the front of the tombstones.
Fill an AC-222 Large Bottle and Writer Tip with SW-508 Black Gloss and use it to fill in the bats, the sides of the tombstones and write RIP on each one.
Using the CB-106 Script Liner, apply 2 coats of SW-165 Lavender Mist to the sky. Don’t apply tothe rim. Use a smaller brush if you wish to get into the tight areas around the house and moon.
Do not stilt or hang over the edge of the kiln shelf.
