Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
Freehand a fun design or position Pattern #1 on top of the platter. Slide AC-230 Clay Carbon Paper under the pattern. Trace the pattern with a pencil.
Using the Soft Fan with SC-16 Cotton Tail, apply 2 coats to the right side of the tray. Allow glaze to dry between coats.
Using the Soft Fan with SC-1 Pink-A-Boo, apply 2 coats to the left side of the try. Allow glaze to dry between coats.
Using the Script Liner with SC-9 Jaded, SC- 45 My Blue Heaven and SC-77 Glo-Worm, apply 2 coats to the corresponding sections of the pattern. Allow glaze to dry between coats.
After the glaze is dry to the touch, place Pattern #2 over the tray. Trace over the pattern with a pencil. Lift the pattern to make sure you aren’t pressing too lightly or too hard.
Using the Script Liner with SC-9 Jaded, SC-10 Teal Next Time, SC-45 My Blue Heaven and SC-77 Glo-Worm, apply 2 coats to the corresponding sections of the pattern. Allow glaze to dry between coats.
Using the Detail Liner with SC-15 Tuxedo, apply decorative lines and dots to the pattern. You can use a pencil eraser to make dots.
Using the Soft Fan with SC-15 Tuxedo, apply 2 coats to the back of the platter. Allow glaze to dry between coats.
