Valentine Teapot Fairy House

Instructions

Begin with properly fired shelf cone 04 Bisque. Moisten a clean sponge and wipe bisque to remove dust.
Use the Soft Fan and Script Liner to apply one coat of SC-16 Cotton Tail to the entire fairy house.
Use the paper punch to create paper hearts. Wet each heart and press randomly around the teapot. Press gently with a paper towel to ensure the edges area sealed.
Use the Soft Fan and Script Liner to apply three coats of SC-74 Hot Tamale to the teapot and door. Do not apply to the door frame, steps or base of the teapot. Remove the hearts. Using a straight pin is helpful in lifting the paper.
Use SG-402 White Designer Liner to create a woodgrain design on the door.
Use the Liner to apply one coat of SC-15 Tuxedo to the door, window and knob. Use the same brush to outline the inside and outside of the door frame.
Use SG-403 Red Designer Liner to create bricks on the base of the teapot and to separate the steps.
Dip into NT-CLR Clear Dipping Glaze or use the Soft Fan to apply one coat of S-2101 Clear Brushing Glaze to the door, steps and base of the teapot. The goal is to ensure the Designer Liner areas have clear glazes over them.
Fire to cone 05/06.

Form

Colors

Decorating Accessories

Miscellaneous Accessories