Make a hole in the bottom if intended use if a planter for drainage. Fire greenware to cone 04.
Thin slightly FN-009 Black, pour to the inside, turn to coat, pour out the excess glaze, drain.
Brush on one coat of CG-995 Foggy Mist with CB-604 Soft Fan to the dog, avoid the eyes.
Use CB-602 Soft Fan or CB-604 Soft Fan (using the side of this brush as it is too wide) brush on EL-125 Sahara Sands heavily in a horizontal stripe, about an inch wide, next stripe is EL-213 Painted Desert, overlap the first stripe, continue on the head to the feet with the striping.
Pour PC-602 White Cascade into a AC-222 Bottle, use the plastic tip only to apply an uneven thick line of the cascade over the Sahara Sands stripe. I like to let the White Cascade thicken up so it will apply thick and stay put. Let dry so that it will not mingle the colors in the next step.
Apply two more heavy coats of the Sahara Sands and Painted Desert as in step 4. Apply over the White Cascade.
Remove the glaze from the nose, eyes, and the mouth line (with a clean-up tool).
Use a sponge on a stick to apply SC-15 Tuxedo to the ST-133 Woodgrain Stamp, press to the body and head of the dog. These lines will break up and look liked fur.
Brush the eyes with 2 coats of SC-16 Cotton Tail, iris with 2 coats of SC-14 Java Bean, pupil, nose and outline eyes and mouth with SC-15 Tuxedo.
