Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
Lay MT-012 Ikat flat on the table and use a sponge on a stick to apply UG-91 True Teal to the plate. The width of the mat should just fit the inside of the salad plate, so line it up and carefully press down to apply.
Let dry completely
Carefully apply 2 coats of SG-701 Stardust. Be sure not to over brush as it will smear the design.
Apply 3 coats of SW-164 Satin Patina to the back and rim of the plate. Avoid glazing the foot and bottom of the plate.
Use a clean sponge to wipe the bottom clean any glaze that may have gotten out of place.
Let dry completely and fire in oxidation to cone 6.
