Tooled Leather Stein

Instructions

Begin with a properly fired shelf cone 04 Bisque. Moisten a clean sponge and wipe bisque to remove dust.
Using the AC-230 Clay Carbon paper, transfer the pattern onto the ware.
Using the SG-401 Designer Liner Black, outline the entire design.
Thin with some water the SW-304 Copper Wash.
Using the CB-404 # 4 Pointed Round apply 1 coat of the thinned Copper Wash to the leaves and stem.
Using the CB-404 # 4 Pointed Round apply 2 coats of SW-174 Leather to the bands and handle, and the frame around the design
Using the CB-604 # 4 Soft Fan apply 2 coats of SW-167 Sand and Sea to the inside and remaining bisque areas, excluding the bottom.
Using a damp sponge, remove any glaze from the bottom.
Place onto a well kiln washed shelf and fire to shelf cone 5-6.

Form

Colors

Decorating Accessories

Miscellaneous Accessories