Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
Using the CB-604 Soft Fan Brush, apply 3 coats of SW-140 Matte Black to the back side of the bowl, leaving the bottom and foot unglazed.
Using the CB-604 Soft Fan Brush, apply 3 coats of SW-146 Aurora Green to the inside of the bowl. Make sure you have plenty of crystals in your coats. Let dry.
Using the Soft Fan brush, apply 2 heavy coats of SW-210 Emerald to the upper rim of the inside of the bowl about 2 inches wide.
Using the Soft Fan brush, apply 2 heavy coats of SW-250 White Opal right below the band of Emerald, about 2 inches wide.
Using the Soft Fan Brush, apply 2 heavy coats of SW-123 Sapphire to the rest of the inside of the bowl.Wipe off any excess glaze from the foot of the teapot
with a damp sponge.
Do not stilt or hang over the edge of the kiln shelf.
