Stoneware Dragon Mug

 

Products Used


Bisque
  • SB-120 Stoneware Latte Cup
Color
  • UG-46 Bright Yellow
  • UG-204 Orange
  • UG-206 Fire Engine Red
  • SC-88 Tu Tu Tango
  • SG-401 Black Designer Liner
  • SW-001 Stoneware Clear
  • SW-111 Wrought Iron
Decorating Accessories
  • AC-310 Silkscreen Medium
  • DSS-0115 Dragons
  • CB-604 #4 Soft Fan
  • CB-106 #6 Script Liner
Miscellaneous Accessories
  • Palette
  • Palette Knife

 

118.StonewareDragonMug
Designer: Marcia Roullard
 
 

Instructions

  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using the #4 Soft Fan, apply 3 coats of SW-111 Wrought Iron to the inside, brushing in a circular direction.
  3. Use a palette knife to thicken SG-401 Black with AC-310 Silkscreen Medium to a peanut butter consistency.
  4. Hold the dragon screen (shiny side down) over the mug. Using your finger rub the thickened SG-401 Black over the dragon, making sure to get all the sections of the dragon.
  5. Using the #6 Script Liner, apply 2 coats of the Underglaze colors over the screened sections of the fire and dragon.
  6. Use the Script Liner for these steps. Fade UG-206 Fire Engine Red to UG-204 Orange on the body. Lighten the Orange with UG-46 Bright Yellow for the body section closest to the flames. Brush the flames with 2 coats of UG-46 Bright Yellow, shading with UG-204 Orange.
  7. Use the Script Liner to apply 2 coats of SC-88 Tu Tu Tango to the rim of the cup. When dry, use the Soft Fan to apply 3 coats of SW-001 Clear to the cup.
  8. Use the Soft Fan and Script Liner to apply 3 coats of SW-111 Wrought Iron to the handle.
  9. Clean the glaze from the bottom and fire to cone 6.

Who We Are

Our purpose, history and policies

About Us Warranty & Freeze Policy

Site Map

Where To Buy

Looking for a ceramic studio, retailer or wholesaler?

Find a Location

Project Library

Step by Step Instructions from the Professionals at Mayco.

Project library

New Projects