Ladybug w/ Wings Eye Plate & Mug

Create this Ladybug Eye Plate and Mug with Stroke & Coats an Foundations.

Products Used

  • MB-1324 - Plate with Eyes
  • MB-1325 - Mug with Eyes
  • FN-009 - Black
  • SC-15 - Tuxedo
  • SC-16 - Cotton Tail
  • SC-74 - Hot Tamale
  • SC-76 - Cara-Bein Blue
  • NT-CLR Clear One Dipping (optional)
Decorating Accessories
  • BT-910 - Synthetic Sponges
  • CB-106 - #6 Script Liner
  • CB-110 - #10/0 Liner
  • CB-202 - #2 Detail Liner
  • CB-604 - #4 Soft Fan
Additional Materials
  • Pencil
Project Info
  • Designer: Marcia Roullard
  • Skill Level: Basic
  • Time: 1½ hours


  1. Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using a CB-604 #4 Soft Fan, apply 3 coats of SC-74 Hot Tamale to the area above the eyes on the plate and the outside of the mug except the eyes.
  3. Using a CB-604 #4 Soft Fan, apply 3 coats of SC-15 Tuxedo to the area just above the eyes and below the eyes. Allow to dry.
  4. With a pencil, sketch the wing separation on the plate and dots on the plate & mug.
  5. Apply 2 coats of SC-15 Tuxedo to the dots and wing separation.
  6. Using a CB-106 #6 Script Liner, apply 1 thinned coat of SC-74 Hot Tamale to the eyes.
  7. Using a CB-202 #2 Detail Liner, apply 2 coats of SC-16 Cotton Tail to the eye area. Apply 2 thinned coats of SC-76 Cara-Bein Blue to the iris of the eye. Apply 1–2 coats of SC-15 Tuxedo to the pupil of the eye. Add a highlight of SC-16 Cotton Tail.
  8. Using a CB-110 #10/0 Liner, outline the eye and add eye lashes with SC-15 Tuxedo.
  9. Using a CB-604 #4 Soft Fan, apply 2 - 3 coats of FN-009 Black to the back of the plate and inside the mug. Allow to dry.
  10. Optional: Can be dipped in clear glaze. Allow to dry.
  11. Stilt and fire to shelf cone 06.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers


PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

Technical Support