Glitter & Glaze Masquerade


Products Used

  • MB-1384 Masquerade Mask Box
  • SC-33 Fruit of the Vine
  • SC-11 Blue Yonder
  • SC-31 The Blues
  • SC-74 Hot Tamale
  • SC-23 Jack O’ Lantern
  • SG-401 Black Designer Liner
  • S-2101 Crystal Clear Brushing Glaze
  • SS-135 White Softees Acrylics
Decorating Accessories
  • CB-106 #6 Script Liner
  • CB-604 #4 Soft Fan
glitter glaze masquerade
Additional Materials
  • Pencil AC-230
  • Clay Carbon Paper
  • Silver Glitter
  • Teal Glitter
  • Download Project Pattern
Project Info
  • Designer: Adena Griffith
  • Skill Level: Basic
  • Time: 1½ hours


  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Inside of the box apply three coats with the CB-604 #4 Soft Fan Brush of SC-11 Blue Yonder.
  3. Using the Clay Carbon Paper, a pencil, and the pattern apply the design to the face of the box. Go over the design with the SG-401 Black Designer Liner.
  4. Use the CB-106 #6 Script Liner to apply SC-11 Blue Yonder, SC-31 The Blues, and SC-33 Fruit of the Vine to the wave parts of the mask. Puddle the glazes into the sections of the SG-401 Black Designer Liner.
  5. Apply SC-23 Jack O’ Lantern in the same way into some of the dots.
  6. Use three coats of SC-74 Hot Tamale on the lips of the face using the same brush.
  7. Once all of the parts have dried apply three coats of the S-2101 Crystal Clear Brushing glaze to the whole piece. Careful on your brushstrokes to not smudge the design.
  8. Fire to cone 06.
  9. Apply dots of the SS-135 White Softees Acrylics to some of the dots on the mask. Before it is dry apply the Silver Glitter. Repeat this with the waves and the Teal Glitter.