Finial Jar Element Combo

 

Products Used

Bisque
  • MB-1444 Lg. Finial Jar
Color
  • EL-106 Tidal Pool, EL-121 Copper Adventurine, EL-139 Nectar, PC-601 Clear Cascade, SC-15 Tuxedo

Decorating Accessories

  • CB-604 Soft Fan, ST-127 Crackle Stamp

Miscellaneous Accessories

  • 2" foam roller

 

452.Finial Jar Element Combo
Designer: Marcia Roullard
 
 

Instructions

  1. Remove dust with a damp sponge on 04 bisque.
  2. Thin EL-139 Nectar slightly with water, pour to the inside, roll to cover, pour out excess.
  3. Brush four coats of EL-139 Nectar 1 1/2 inches  to the top of the finial jar, and 1 inch at the bottom, brush over the top two rings on the base.  Brush the Nectar to the bottom 1/2 inch of the lid.  Use CB-604 Soft Fan.
  4. Brush the top section of the lid the spire and the ring only, with two coats of SC-15 Tuxedo.
  5. Brush three coats of EL-106 Tidal Pool to the middle section of the finial jar, brush two coats overlapping the Nectar glaze 1 inch.
  6. With CB-604 Soft Fan, brush one heavy coat of PC-601 Clear Cascade over the bottom middle section of the finial jar.
  7. Brush three coats of EL-121 Copper Adventurine over the entire lid, and base of the jar, including the rings above the base, recede the last coat 1/2 inch from the bottom.
  8. Use SC-15 Tuxedo with the 2" foam roller to apply to ST-127 Crackle Stamp, stamp to the middle section of the finial jar.
  9. Fire to cone 06.

Who We Are

Our purpose, history and policies

About Us Warranty & Freeze Policy

Site Map

Where To Buy

Looking for a ceramic studio, retailer or wholesaler?

Find a Location

Project Library

Step by Step Instructions from the Professionals at Mayco.

Project library

New Projects