- Last Updated: Thursday, 06 February 2020 14:50
- MB-1056 or CD-1056 Heart Dish
- FN-01 White
- SC-5 Tiger Tail
- SC-24 Dandelion
- SC-33 Fruit of the Vine
- SC-98 Slime Time
- SG-401 Black
- SG-404 Blue
- SG-405 Green
- SG-407 Yellow
- SG-409 Bright Green
- SG-410 Bright Blue
- SG-411 Purple
- S-212 Blue Diamond
- S-216 Sea Glass
- NT-BR Clear One Brushing
- CB-106 Script Liner
- CB-220 Detail Liner
- CB-406 Pointed Round
- CB-604 Soft Fan
- AC-230 Clay Carbon
- Pattern: Download
Use a moistened Synthetic Sponge to wipe downs the piece to remove any dust.
Using CB-604 Soft Fan to apply 2 coats of FN-01 White to the entire surface. Let dry.
Use a pencil to transfer the design using AC-230 Clay Carbon.
Load CB-406 Pointed Round with water and tip with S-212 Blue Diamond and shade the petals as shown in the pattern.
Shade the inside of the flower center (circular portion) with SC-98 Slime Time in the same manner.
Using CB-220 Detail Liner to paint in the stamen of the flower with SC-24 Dandelion. Shade one side of the stamen with SC-5 Tiger Tail. High light other side of stamen with SG-407 Yellow and add a few dots of SG-409 Bright Green. Use SG-411 Purple to fill in the portion of the stamen that is shown in solid black on the pattern.
Outline the flower petals with SG-404 Blue. Keep this line as fine as possible.
The frilly portion of the inner flower is SG-410 Bright Blue. These lines extend out about half way from the center of the flower. There are shorter lines that extend over the previous lines about 1/3 of the length which are SG-411 Purple. Note the slight direction to the lines in the pattern as you paint. Keep these lines as fine as possible as well.
Use SG-401 Black to dot in the ring that runs around the center stamen. Use SG-411 Purple to paint in the fine lines around the stamen noting their curvature.
Apply 2 coats of S-216 Sea Glass to the leaf. Thin some SG-405 Green with water to shade the sections of the leaf. Apply more green towards the base of the leaf next to the flower.
Use SG-409 Bright Green and SG-405 Green to draw in the tendrils of the flowers.
Apply 3 coats of SC-33 Fruit of the Vine to fill in the trim around the plate using CB-106 Script Liner. Apply 3 coats to the ball feet as well.
Apply 1 coat of NT-BR Clear One Brushing over entire piece.
Stilt and Fire to Shelf Cone 05-06