St. Patty's Tray


Products Used

  • MB-882 Rectangle Tray
  • SC-SC-6 Sunkissed
  • SC-15 Tuxedo
  • SC-26 Green Thumb
  • SC-36 Irish Luck
  • SC-43 Lettuce Alone
  • FN-013 Light Yellow
  • FN-020 Medium Green
Decorating Accessories
  • CB-106 #6 Script Liner
  • CB-110 #10/0 Liner
  • CB-202 #2 Detail Liner
  • CB-604 #4 Soft Fan
  • BT-910 Synthetic Sponge
  • AC-213 Sponge on a Stick
  • AC-230 Clay Carbon Paper
  • ST-120 Celtic Knot
  • MC-002 1/2" Low Tack Masking Tape
stpattys tray
Additional Materials
Project Info
  • Designer: Carmen Allen
  • Skill Level: Basic
  • Time: 1½ hours


  1. Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using a CB-604 #4 Soft Fan, apply 3 coats of FN-013 Light Yellow to the center of the tray.
  3. Once it is dry use the MC-002 ½” Low Tack Masking Tape to tape off the center of the tray for easy application to the edges.
  4. Using a CB-604 #4 Soft Fan, apply 3 coats of FN-020 Medium Green to the edges and back of the tray. Let it dry completely.
  5. Using the AC-213 Sponge on a Stick load the sponge with SC-36 Irish Luck. Be sure to blot excess paint off the sponge before you apply it to the stamp. Tap the SC-36 Irish Luck onto the ST-120 Celtic Knot Stamp then Lay the stamp down on the edge of the tray; repeat this process until all of the edges are covered. You may then remove the tape. Allow to dry.
  6. With a pencil and AC-230 Clay Carbon Paper, transfer the design into the center of the tray.
  7. Using a CB-110 #10/0 Liner apply 2 coats of SC-36 Irish Luck to the letters.
  8. Using a CB-106 #6 Script Liner, apply 2 coats of SC-26 Green Thumb to the hat.
  9. With the same brush shade one side of the hat with SC-36 Irish Luck and Highlight the other side with SC-43 Lettuce Alone.
  10. Using a CB-202 #2 Detail Liner to apply 2 coats of SC-15 Tuxedo to the strap on the hat and 3 coats of SC-6 Sunkissed to the buckle.
  11. Let dry completely.
  12. Stilt and fire to shelf cone 06/05.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers


PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

Technical Support