Stoneware Dragon Mug


Products Used

  • SB-120 Stoneware Latte Cup
  • UG-46 Bright Yellow
  • UG-204 Orange
  • UG-206 Fire Engine Red
  • SC-88 Tu Tu Tango
  • SG-401 Black Designer Liner
  • SW-001 Stoneware Clear
  • SW-111 Wrought Iron
Decorating Accessories
  • AC-310 Silkscreen Medium
  • DSS-0115 Dragons
  • CB-604 #4 Soft Fan
  • CB-106 #6 Script Liner
Miscellaneous Accessories
  • Palette
  • Palette Knife


Designer: Marcia Roullard


  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using the #4 Soft Fan, apply 3 coats of SW-111 Wrought Iron to the inside, brushing in a circular direction.
  3. Use a palette knife to thicken SG-401 Black with AC-310 Silkscreen Medium to a peanut butter consistency.
  4. Hold the dragon screen (shiny side down) over the mug. Using your finger rub the thickened SG-401 Black over the dragon, making sure to get all the sections of the dragon.
  5. Using the #6 Script Liner, apply 2 coats of the Underglaze colors over the screened sections of the fire and dragon.
  6. Use the Script Liner for these steps. Fade UG-206 Fire Engine Red to UG-204 Orange on the body. Lighten the Orange with UG-46 Bright Yellow for the body section closest to the flames. Brush the flames with 2 coats of UG-46 Bright Yellow, shading with UG-204 Orange.
  7. Use the Script Liner to apply 2 coats of SC-88 Tu Tu Tango to the rim of the cup. When dry, use the Soft Fan to apply 3 coats of SW-001 Clear to the cup.
  8. Use the Soft Fan and Script Liner to apply 3 coats of SW-111 Wrought Iron to the handle.
  9. Clean the glaze from the bottom and fire to cone 6.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers


PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

Technical Support