Bold Turkey

 

 
 
Products Used

Bisque
  • MB-890 - Asian Flair 11" Square Plate
Color
  • CG-753NT - Sassy Orange
  • CG-756NT - Firecracker
  • CG-961NT - Evergreen
  • FN-017 - Purple
  • SC-5 - Tiger Tail
  • SC-6 - Sunkissed
  • SC-15 - Tuxedo
  • SC-16 - Cotton Tail
  • SC-24 - Dandelion
  • SC-71 - Purple-licious
  • SC-74 - Hot Tamale
  • SP-205 - Speckled Tiger Tail
  • SP-206 - Speckled Sunkissed
Decorating Accessories
  • AC-230 - Clay Carbon Paper
  • BT-910 - Synthetic Sponges
  • CB-110 - #10/0 Liner
  • CB-404 - #4 Pointed Round
  • CB-604 - #4 Soft Fan
Bold_Turkey
 
 
Additional Materials
  • Water Bowl
  • Paper Towels
  • 1” Masking Tape
  • Pen or Pencil
  • Pattern: Download
 
Project Info
  • Designer: Tim McPherson
  • Skill Level: Basic
  • Time: 2 hours
 

Instructions

  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean BT-910 Synthetic Sponge and wipe bisque to remove any dust.
  2. Apply masking tape to the edge of the plate; bring it to the edge to create a border.
  3. Using AC-230 Clay Carbon Paper, trace on the pattern.
  4. Using a CB-404 # 4 Pointed Round, apply 3 coats of SC-6 Sunkissed to every other feather and SP-206 Speckled Sunkissed to the remaining feathers.
  5. To the face, apply 3 coats of SC-5 Tiger Tail.
  6. To the body, apply 3 coats of SP-205 Speckled Tiger Tail.
  7. Using a CB-404 # 4 Pointed Round, apply 3 coats of SC-71 Purple-licious to the hat band.
  8. Using a CB-404 # 4 Pointed Round or CB-110 # 10/0 Liner, apply 2 coats of SC-24 Dandelion to the buckle on the hat and his beak.
  9. Using a CB-404 # 4 Pointed Round, apply 2 coats of SC-15 Tuxedo to the hat and hat rim, and the sky area behind the wings.
  10. Using a CB-404 # 4 Pointed Round, apply 1 coat of SC-74 Hot Tamale to the waddle, then 1 coat of CG-756 Firecracker.
  11. Using a CB-404 # 4 Pointed Round, apply to the tips of the wings a small amount of CG-753 Sassy Orange and blend towards the body.
  12. Using a CB-110 # 10/0 Liner, fill in the eye with SC-16 Cotton Tail, add the pupil with SC-15 Tuxedo.
  13. Remove the masking tape.
  14. Outline and detail the entire design with a CB-110 # 10/0 Liner loaded in SC-15 Tuxedo.
  15. Using a CB-604 # 4 Soft Fan, apply 3 coats of FN-017 Purple Foundation to the border and back of the plate.
  16. Apply 1 coat of CG-971 Purple Cosmos over the border area. Allow to dry.
  17. Stilt and fire to shelf cone 06.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers

Distributors

PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

info@maycocolors.com

Technical Support

614-675-2031

technical@maycocolors.com