- Last Updated: Thursday, 06 June 2019 14:07
- MB1406 Top Hat
- FN-001 White
- FN-004 Red
- FN-006 Blue
- MC-002 12mm (1/2")
- Low Tack Masking Tape
- CB-604 Soft Fan
- BT-910 Synthetic Sponge
- Download: Pattern
Designer: Adena Griffith
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- From the pattern, cut out enough paper stars to go around the base (right below the rim).
- Apply 2 coats of FN-001 White to the top of the hat using a CB-604 #4 Soft Fan.
- Right below the rim of the hat, apply the stars to the FN-001 White before it is completely dry. If you find it will not stick dip your brush into water and rewet the white.
- Once the FN-001 White is completely dry, apply the MC-002 12mm (1/2") Low Tack Masking Tape in a vertical stripe pattern to the top portion of the hat. Be sure to create a separation between section using the tape. Refer to the image for reference.
- Apply 3 coats of the FN-006 Blue to the lower part of the hat using the CB-604 Soft Fan brush.
- Apply 3 coats of FN-004 Red over the striped section using the CB-604 Soft Fan brush.
- Once the designed part is almost dry, remove the tape.
- Apply 3 coats of FN-004 Red to the rest of the bisque form including the inside of the top hat.
- Stilt and fire to cone 06.