Striped Clay Clipboard


Products Used

  • MB-1461 Clay Clipboard
  • SC-15 Tuxedo
  • SC-27 Sour Apple
  •  SC-55 Yella Bout It
  • SC-60 Silver Lining
  • SG-401 Black
  • NT-CLR Clear Dipping Glaze 

Decorating Accessories

  • AC-310 Silkscreen Medium
  • DSS-0134 Faceted Designs
  • CB-604 #4 Soft Fan

Miscellaneous Accessories

  • Palette Knife
  • Tape - 1.25" and .75"
  • Ruler


441.Striped Clay Clipboard
Designer: Marcia Roullard


  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Use tape to create a 1 1/4" border around the clipboard. Use the CB-604 #4 Soft Fan to apply two-three coats of SC-55 Yella Bout It to the center space.
  3. Let dry. Use 3/4" tape  to tape to create a striped pattern. Use the Soft Fan to apply two coats of SC-60 Silver Lining with SC-15 Tuxedo in the brush to fill in the open stripe.
  4. Remove the tape and let dry. Use the Soft Fan to apply three coats of SC-60 Silver Lining to the border.
  5. Thicken SC-15 Tuxedo with AC-310 Silkscreen Medium using a palette knife to the consistency of peanut butter.
  6. Use the border screens from DSS-0134 Faceted Designs with the the shiny side up for stronger lines. Flip the screen for a mirror image on the border of the clipboard.  To screen, rub the thickened Tuxedo over the image, remove, gently wash to continue screening around the border. Let dry.
  7. Dip in NT-CLR and let dry. 
  8. Fire to cone 05/06.

After the Clipboard has cooled, use epoxy to glue on the clip following the directions on the package or refer to 'Clipboard - Attaching the clip' video on the Mayco YouTube channel