Bow Box


Products Used

  • MB-1136 - Bow Box
  • FN-011 - Light Blue
  • SC-34 - Down to Earth
  • SC-45 - My Blue Heaven
  • SC-78 - Lime-Light
Decorating Accessories
  • BT-910 - Synthetic Sponges
  • CB-106 - #6 Script Liner
  • CB-202 - #2 Detail Liner
  • CB-604 - #4 Soft Fan
Additional Materials
  • Plain Copy Paper
  • Paper Punch: Fiskers - Bling Bling
  • Straight Pin
  • Tweezers
Project Info
  • Designer: Marcia Roullard
  • Skill Level: Basic
  • Time: 1 hour


  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using a CB-604 #4 Soft Fan, apply SC-45 My Blue Heaven and SC-78 Lime Light in a patchy fashion on the box. Repeat with another coat placing the color in the same spots.
  3. Using a CB-106 #6 Script Liner, apply 3 coats of SC-45 My Blue Heaven to the bow.
  4. Punch out plenty of the bling bling shapes. Brush water on a section of the box, then place the paper cut out shape onto the damp glaze. Brush back over the paper cut out with a wet CB-312 #12 Flat Shader. This process will temporarily adhere the paper to the glaze without damaging the delicate paper shape.
  5. Brush over the box shape with 2-3 coats of SC-34 Down to Earth. In order to be able to locate it after glazing, mark your cut out shapes through the glaze with a scratch.
  6. When the last coat starts to dry pick off the paper shapes with a straight pin.
  7. Use a CB-202 #2 Detail Liner with SC-34 Down to Earth to decorate the bow and ribbon with small lines that look like chocolate sprinkles.
  8. Using a CB-604 #4 Soft Fan, apply 3 coats of FN-011 Light Blue to the inside of the box.
  9. Paint the shadow areas of the bow with 1 coat of SC-34 Down to Earth.
  10. Stilt and fire to cone 06.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers


PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

Technical Support