- Last Updated: Wednesday, 09 October 2019 16:09
- MB-1486 Rustic Tray
- FN-301 Marshmallow White
- SC-24 Dandelion
- SC-26 Green Thumb
- SC-34 Down to Earth
- SC-36 Irish Luck
- SC-48 Camel Back
- AC-230 Clay Carbon Paper
- RB-144 #4 Soft Fan
- RB-106 #6 Script Liner
- RB-110 10/0 Detail Liner
- Sponge, water, palette, pencil, sponge on a stick
- Baby's bottom
- Dagger brush
- Pattern: Download
Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
Using the Soft Fan with FN-301 Marshmallow White, apply 4 coats to the front and back of the tray. Allow glaze to dry between coats.
Squeeze around 2 TBS of SC-24 Dandelion onto the palette. Dip the sponge on a stick into the glaze and sponge the baby’s bottom. Take the tray and press the center against the baby’s bottom. Allow glaze to dry completely.
Place the AC-230 Clay Carbon Paper onto the tray. Position the pattern so that the stem and leaves are above the print. Trace the pattern using the pencil.
Using the Script Liner with SC-48 Camel Back, apply 1 coat to the stem.
Using the Detail Liner with SC-34 Down to Earth, make accent lines on the edges of the stem.
Using the Script Liner with SC-26 Green Thumb, apply 1 coat to the leaves.
Using the Detail Liner with SC-36 Irish Luck, make accent lines on the leaves.
Use the pencil to sketch the lettering. Using the Detail Liner with SC-34 Down to Earth, apply 1 coat to the lettering.
Squeeze 1 TBS of SC-24 Dandelion onto the palette. Thin with water. Use the dagger brush to go around the edges of the platter.
Fire to cone 06.