• Mayco Designer Silkscreens are a great and easy way to add intricate detail to your work.
    Read More
  • Mayco Flux - SW-401 Light Flux & SW-402 Dark Flux Movement • Interaction • Beauty Mayco's SW-401 Light Flux and SW-402 Dark Flux
    Read More
  • 16 new stoneware glazes, including 6 soft mattes and 7 crystals. we also introduce a zinc-free clear that works well
    Read More
  • Convert your original artwork - or artwork for which you have the legal rights to use* - into a hand-applied silkscreen. No
    Read More
load more / hold SHIFT key to load all load all

toadhouse elements

Products Used

  • Low Fire White Clay
  • EL-144 Dark Amethyst
  • EL-145 Ginger Root
  • EL-143 Cactus Flower
  • EL-146 Rain cloud
  • EL-142 Grass

Decorating Accessories

  • RB-144 #4 Soft Fan
  • ST-113 Circulate Stamp
  • ST-353 Jumbo Swirl Blocks Stamp
  • ST-367 Leafy Border stamp
  • CD-776 Circle Slump & Hump Mold
Miscellaneous Accessories
  • Sponge
  • Rib
  • Large (40oz) Tin Can
  • Pencil
  • Fettling knife
  • Paper
Designer: Bre Kathman


For grade levels 6-12

Creating Outdoor housing for animals is a great way to connect science and art in the classroom. Students will have a blast researching animal houses that they can create with their own hands and finding a way to introduce it into the environment.


  • Students will experience the use of clay techniques and processes.

  • Students will use their imagination to create a house for an outdoor animal.

  • Students will research and connect outdoor habits with artistic expression.


  1. Roll a slab approximately 1/4 inch thick.
  2. Place slab on CD-776 Circle Slump & Hump Mold

  3. Compress slab on hump mold with sponge or rib.

  4. Use ST-367 Leafy Border Stamp to create texture on the top of the compressed slab. This will be the top of the house.

  5. Cut excess clay around the outside edge of the mold.

  6. Roll out another slab approximately ¼ inch thick 11” long and 7” tall, compress and set aside.

  7. Wrap paper around the tin can.

  8. Cut the bottom edge of the slab to be flat.

  9. Wrap slab around paper and can with the flat side on the bottom.

  10. Slightly overlap the slab and cut any extra clay off.

  11. Smooth the overlapped clay into the rest of the slab to create a tube around the can. This is base of the house.

  12. Cut around the top edge of the can to create a flat top to attach the roof.

  13. Texture the slab on the can with ST-113 Circulate Stamp.

  14. Cut a hole for the door (be sure to only cut 2 sides of the door so it will stay connected.

  15. Remove slab from can.

  16. Score and slip the top of the house and the bottom side of the soon to be roof created earlier.

  17. Place roof slab on the house.

  18. Create an organic wave with roof edge and add ST-353 stamp for extra texture.

  19. Add welcome sign and any other additions.

  20. Let dry completely.

  21. Bisque fire to cone 04.

  22. Paint 3 coats of EL-146 Rain Cloud on the outside wall of the house. We will leave the bottom and the inside unglazes to let moisture release from the house.

  23. Paint 3 coats of EL- 145 Ginger Root on the door except for the handle and hinges.

  24. Paint 3 coats of EL-144 Dark Amethyst on the handle and hinges of the door.

  25. Paint 2 coats of EL-143 Cactus Flower on Welcome sign.

  26. Wipe welcome sign with a damp sponge until you can read the words.

  27. Paint 3 coats of EL-144 Dark Amethyst on the screws on the welcome sign.

  28. Paint 3 coats of EL-142 Grass to the roof. Let dry.

  29. Rub the roof and walls with your hand so that some of the glaze is removed from the high points of the roof. This will promote the color changes in the glaze.

  30. Let dry, stilt and fire to Cone 06.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers


PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904


Technical Support



Newsletter Sign-up